 |
 |

 |
Rapid Moisture Meters |
 |
 |
 |
| |
We offer high precision Rapid moisture meter for our clients. This device helps in the quick determination of moisture content of materials in powder form viz. Soil, Sand , Coal Pottery Slip, Cement etc. Calcium carbide when comes in contact with moisture, Acetylene gas is generated. This principle is used in Rapid moisture meter. A weighed quantity of samples is mixed with fixed quantity of Calcium Carbide Reagent and the whole mixture is thoroughly shaken in a vessel to which a pressure gauge is fixed. The Acetylene gas produced develops pressure. The instrument then indicates the moisture on wet weight basis. This measurement can be easily converted to dry weight basis. The device consists of the following attachments:
- A pressure vessel with clamp for sealing cap.
- Rubber sealing gaskets.
- Pressure gauge calibrated in percentage moisture content 0-25% on wet weight basis.
- A count poised balance for weighing sample.
- A scoop for measuring carbide reagent.
- One bottle of reagent approx. 450 gram.
- One cleaning brush and a steel balls for through mixing.
- Complete in wooden carrying box with handle.
Our Rapid Moisture Meter conforms with IS 2720 (PART II) on 0-25%.
|
|
|

 |
Test Sieves |
 |
 |
 |
| |
The frame is made out of spun brass and without any joint in it. A clean rigid design of minimum weight and free from corners where the material could be lodged. Uniform fabrications of our sieves permit easy and smooth nesting on each others and also with lid and receivers. Imported stainless steel 18/8 quality or Phosphor Bronze standard sieve cloth is used for batter performance and lasting. An essential feature of test sieves is that the mesh should be flat, taut and uniform and with permanent tension round the whole circumference.
Test Sieves are available in one piece frame of 4" diameter and also available in sizes of 1-1/2", 3", 5" and 6" diameter with suitable lid and receiver.
|
|
|

 |
Sand Pouring Cylinders |
 |
 |
 |
| |
Sand Pouring Cylinder Apparatus - Standard and Large
Ref Std : IS 2720 (Part 28)
This Apparatus is used for determination of the dry density of compact, fine , medium grained soils and for layers not exceeding 50 cm thickness. |
|
|

 |
Liquid Limit Device |
 |
 |
 |
| |
Liquid Limit Device, Casagrande Method, Motorised and Manual Models
Ref Std : IS 2720 (Part 5), IS 9259, BS 1377
The Liquid Limit Device help us to conduct Liquid limit which is defined as the moisture content at which the soil passes from plastic state to liquid state. It is helpful for classification of the potential properties of soil material.
|
|
|

 |
Pycnometer |
 |
 |
 |
| |
Pycnometer
Ref Std :IS 2386
Specific Gravity is the ratio of the weight in air of the given volume of a material at a standard temperature to the weight in air of an equal volume of distilled water at the same stated temperatue.
|
|
|

 |
Universal Automatic Compactors |
 |
 |
 |
| |
Universal Automatic Compactor
Ref Std : IS 2720
Invariably in every soil laboratory compaction and penetration tests on soils are carried out regularly. The electrically operated mechanical compaction process eliminates the tedious hand compaction process and results in a considerable saving of time.
|
|
|

 |
Rapid Moisture Meters for Moisture Content Determination |
 |
 |
 |
|
|

 |
Rapid Moisture MetersSiever Shaker - Motorised/ Hand Operated |
 |
 |
 |
|
 |
|